stone production line

Stone crusher for crushing limestone, pebbles, granite, basalt

Construction waste crushing production line

Mobile construction waste crushing station for urban construction waste crushing.

jaw crusher spare parts

Jaw crusher is the primary quarry crushing equipment, mainly used for crushing chunks of rock material. Jaw crusher is widely used in mining metallurgy, building material, highway, railway, water conservancy and chemical industry. Is the preferred machine mining crushing machinery. In accordance with the feed opening width size into large, medium and small three kinds, inlet width is greater than 600MM for large crusher, inlet width 300-600MM for medium-sized crushers, feed opening of a width less than 300MM for small crusher.

jaw crusher spare parts


1. Expresses deep crushing chamber design, the feed capacity and yield than normal jaw broken more than doubled;

2. its crushing ratio, uniform particle size;

3. Gasketed nesting population adjustment device, reliable and convenient, adjustment range, increase the flexibility of the device;

4. The system is safe and reliable, easy to replace parts, small maintenance workload;

5. The structure is simple, reliable, low operating costs.

6. Equipment Energy: single saving 15% to 30%, saving the system more than doubled;

7. nesting population adjustment range, can meet the requirements of different users;

8. Low noise, less dust, environmental protection crusher

Technical Parameters

Model Specifications Inlet size
The maximum feed size
Discharge Adjustment range
Processing capacity
PE-250×400 250×400 210 20-60 3-13 15 2.8
PE-400×600 400×600 340 40-100 10-35 30 6.5
PE-500×750 500×750 425 50-100 25-60 55 10.6
PE-600×900 600×900 500 65-180 30-85 55-75 15.5
PE-750×1060 750×1060 630 80-180 72-150 90-110 28
PE-800×1060 800×1060 680 100-200 85-143 90-110 30
PE-870×1060 870×1060 750 170-270 145-235 90-110 30.5
PE-900×1060 900×1060 780 200-290 170-250 90-110 31
PE-900×1200 900×1200 780 95-255 100-240 110-132 49
PE-1000×1200 1000×1200 850 195-280 190-275 110-132 51
PE-1200×1500 1200×1500 1020 150-300 250-500 160 100.9
PEX-150×750 150×750 120 18-48 5-16 15 3.5
PEX-250×750 250×750 210 25-60 8-22 22 4.9
PEX-250×1000 250×1000 210 25-60 10-32 30-37 6.5
PEX-250×1200 250×1200 210 25-60 13-38 37 7.7
PEX-300×1300 300×1300 250 20-90 10-65 75 11

jaw crusher

Working Principle

Jaw crusher broken song moving extrusion type, motor-driven belt and pulley, through the eccentric shaft to move up and down movement of the jaw, when the movable jaw rise between toggle plate and moving jaw angle becomes larger, thus promoting the moving jaw plate to fixed jaw plate close, while the material is squeezed, rub, grind, such as multiple broken; when the movable jaw down, between toggle plate and moving jaw angle smaller, movable jaw plate leave the fixed jaw under the action of the rod, the spring plate, then the crushed material from the crushing chamber discharge port, along with the continuous rotation of the motor periodically mobile jaw crusher crushing and nesting, the crusher to achieve mass production. Jaw crusher may occur troubleshooting method.

Large jaw crusher is mainly used for a variety of ores and bulk materials of medium-grained broken, can be broken compressive strength of not more than 320Mpa materials, sub-coarse broken and fine broken two kinds. The complete series of product specifications, the feed particle size of 600mm ~ 1500mm, is the primary crushing device of choice.

Leave Me A Message, Now

If you have any questions regarding equipment prices, production line configuration or other problems, you can send a message to us, we will contact you soon.